inchman Posted January 5, 2010 Share Posted January 5, 2010 before xmas the loom running from the bulkhead to the rear of the 90 (1990 2.5td) caught on a rag on the drive shaft and was ripped to shreds. i got a new loom and fitted it today. Everything is working except the fuel gauge. I know 3 wires run from the top of the tank to the bulkhead. white, green and black. Has any body any idea where these wires plug into the loom, or anybody any pics of their bulkhead with the wires attached. cheers Gary Quote Link to comment Share on other sites More sharing options...
errol209 Posted January 6, 2010 Share Posted January 6, 2010 before xmas the loom running from the bulkhead to the rear of the 90 (1990 2.5td) caught on a rag on the drive shaft and was ripped to shreds. i got a new loom and fitted it today. Everything is working except the fuel gauge. I know 3 wires run from the top of the tank to the bulkhead. white, green and black. Has any body any idea where these wires plug into the loom, or anybody any pics of their bulkhead with the wires attached. cheers Gary Parts book shows the connection just under the fuel filter, photo of mine attached with the connector (probably ) circled. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.