tonka Posted January 6, 2010 Share Posted January 6, 2010 hi everyone. i am in need of the dimentions of the standard land rover hub form the early 1990's. ideally PCD, centre bore and wheel stud diameter i believe the pcd is 5 x 6.5" or 5 x 165 and the stud diamter is m16. but an online drawing of the whole thing would be really helpful. all help much appreciated Quote Link to comment Share on other sites More sharing options...
errol209 Posted January 9, 2010 Share Posted January 9, 2010 hi everyone. i am in need of the dimentions of the standard land rover hub form the early 1990's. ideally PCD, centre bore and wheel stud diameter i believe the pcd is 5 x 6.5" or 5 x 165 and the stud diamter is m16. but an online drawing of the whole thing would be really helpful. all help much appreciated Click PCD clicky post #7. Couldn't find a drawing for you though Bore is referred to here at 5.15 inches. I use Google to search this forum 'cos the inbuilt search isn't up to complex tasks, "defender hub pcd site:lr4x4.com". Quote Link to comment Share on other sites More sharing options...
tonka Posted January 9, 2010 Author Share Posted January 9, 2010 much appreciated. i did do a google search but didnt find much of interest. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.