goofy2404 Posted October 1, 2014 Share Posted October 1, 2014 I NEED HELP! My puma was driving 100% until I stopped at the store today and noticed oil pissing out from where the dipsticl-tube enters the engine. I had it towed to my workshop and checked the oil but noticed my water bottle is EMPTY! I must say that my car NEVER overheated since i had my head and head-gasket replaced two weeks ago! I removed the bleed screw and started pouring in coolant but even after I added 15liters not a drop was to be seen at the bleed-screw but was streaming out from the dipstick (where the oil Mildly miffed out before). I drained the engine and replaced the oil cooler unit and left the sump-plug out and added coolant again, within seconds the coolant ran out from the sump-plug... in my experience if the head-gasket blew the clooant doesnt run out the sump-plug as fast as I can add coolant... it seems to be running straight through from the water-tank into the sump. Any advice? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.