Mw1984 Posted February 6, 2015 Share Posted February 6, 2015 Hi all sorry for my first post being to ask for help but changing the crankcase filter the other day I accidentally snapped one of the little t pieces on top of one of the injectors, ordered the new Bosch t piece just wondered if anyone could give me a quick run through on replacing I've searches but nothing came up, is it just a case of pulling the braided hoses either side off then popping out the t piece from the top of the injector? Cheers for any help Quote Link to comment Share on other sites More sharing options...
Rangy35 Posted February 7, 2015 Share Posted February 7, 2015 Yes it is that simple, just make sure you remove the little retaining clip from the injector that secures the "T" pice in the injactor and refit it. PS careful dont drop the clip. Quote Link to comment Share on other sites More sharing options...
Mw1984 Posted February 7, 2015 Author Share Posted February 7, 2015 Cheers pal did it before I've just read this, actually dropped one of the clips! Luckily they supplied me with one in the t piece kit I ordered. Hardest part was removing the braided pipe from the pieces as they were seized on, ended up carefully cutting through them with a Stanley blade and just replacing the whole lot with new pipe Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.