[Mileage and speedo cable?]

Hi, On my speed transducer I have one cable going to the transfer box and one going to the speedo head unit, half way up to the head unit it splits and there is another wire with two pieces that look like female spade connectors does any one know what this is for also the speedo/mileage doesn't work I'm guessing this is why, also it's got a LT230 not BW, cheers. Ben

[ECU Relocation]

I have moved the ECU on my 3.5 Dakar and it now sits in the corner of the windscreen on the passenger side so moving to beside the speedo will be simple.

If you remove the speedo binnacle you will be able to reach your arm down inside and pull the whole efi loom up through the hole.

Steve

That's a good idea, I have just ordered a new speedo binnacle so when I change that I can do the ECU at the same time, cheers. Ben

[ECU Relocation]

Thanks for the reply's will there be enouth slack to move it next to the speedo head?, I am quite impressed with the waterproofing I have done to my v8, I can chuck a bucket of water over the dizzy/leads and it doesn't miss a beat, cheers. Ben

[ECU Relocation]

Hi, Is there a kit I can buy to ectend my ecu from my 3.5 rrc with hotwire? cheers. Ben

[These Shocks Any Good?]

Hi, I am thinking of getting a new set of shock absorbers from LRS offroad they have about 14''-15'' travel and have piggybacks aswell, Is there any advantage of having piggybacks? cheers. Ben

[procomp es9000 +5]

Thanks for the link, I had a look and none of them numbers on my shock match-up to the ones on the list, I suppose the other way of telling is taking one off and seeing how long it is, Ben

[procomp es9000 +5]

Hi, I have a set of four es9000 on my rrc would some one be able to tell me the length of travel these shocks have? cheers. Ben

[Rear Shock Top Bushes]

Hi, I have just had my M.O.T glad to say that it passed I got two advisories both the rear shock bushes, I had replaced them 2-3 months before as they ware shot, Is there any way of getting more from them, I am using std landrover buses and have procomp +5 cheers. Ben

[Changing The Fuel Filter]

Thanks for your replys I will be changing my fuel filter soon, cheers. Ben

[Changing The Fuel Filter]

I want to change the fuel filter in my 1989 rrc but in the Haynes manual it tells me to depressurise the fuel system will I have to do this or can I just swap it over? cheers. Ben

[IVA Test?]

Thanks for the replys, It's proberly better left how it is then, Mabey I should just save up for a defender, cheers. Ben

[IVA Test?]

Hi, If I decided to turn my 1989 rrc into a bobtail trayback would it need a IVA test? cheers. Ben

[2007 Defender Post up your Offroad Pics]

Are all the defenders in the pics running std suspension etc? cheers. Ben

[6 Inch Lift And Leaning A lot]

That doesn't look that high, not a 6" lift is it? Has the front bumper been modified to compensate for the body lift?

I have no idea if the bumper has been modified as I brought the rangie like it, Maby the best thing would be for a cage? cheers. Ben

[6 Inch Lift And Leaning A lot]

I would at least start by getting rid of the spacers, you must have plenty of clearance for the arches.... If not can you trim the arches and fit bigger bump stops.... Fitting longer shocks will give you extra droop to compensate. What radius arms and trailling arms etc are you running.... Got any pictures...?

The radius arms, Trailling arms panhard rod etc are std, will this make a difference? here are some pics, cheers. Ben

[6 Inch Lift And Leaning A lot]

What is the actual relevance of a 6" lift...? Are you running huge rubber....?

We lifted a friends 110 6" just for a day to get 40" rubber underneath just on the standard axles.... Can you not give a body lift for some of the clearance you require, portals or anything along these lines....

What's the spec of your rangie......???

The main reason is the 35/12.50R15 BFG Muds but I find it also helps with keeping the water out due to the extra few inches, This is the breakdown of the lift +2 inch spring +2 inch spring spacers and a +2 inch body lift, Ben

[6 Inch Lift And Leaning A lot]

Hi, I have a 6 inch lift on my range rover classic, It likes to lean over a lot when off-road, will fitting twin shocks help with this problem? cheers. Ben

[Electric Mirrors]

Hi, I have just got a second hand pair of Electric Mirrors for my 1989 rrc, the problem is that when you try to move the mirrors with the controls it blows the fuse and when you do sometimes get the mirrors to move they both move together, If you select the right one and want to move it right the left mirror will move left instead of staying still, any ideas? The mirrors are from a 1990, cheers. Ben

[LR in action downunder]

Great pics, was it the outback challenge? Ben

[Roll Cage For A Range Rover Classic]

try r j harvey 01268 784928

Thanks, I have sent them a E-Mail hopefully they will respond with a nice quote Ben

[Roll Cage For A Range Rover Classic]

Hi, Does any one know where I can get a external roll cage for my range rover classic, I have found a few web-sites that do internal but not external, also I can't seem to find any in the south/south east of England, cheers. Ben?