taz90

hi can anyone help ive got a 3.9 efi with a bw t/case fitted into a 1987 90. ive wired up the ecu and got the engine working ok i then wired up a td5 dash and got all the warning lights and the fuel and temp gauges working ok the speedo lights up but not showing any speed the speed transducer is conected to the speedo and the ecu. yellow on the transducer and black red on the speedo via the ecu ive tested the voltage at the speedo and it goes from 12v to 6v about 6 times when i turn the wheel. question. is the rrc speed transducer suitable for the td5 dash. ie the output from the transducer or have i got a faulty speedo thanks tazza

hi iam slowly fitting a 3.9 efi into my 90 all is going well untill today. the engine is from a rrc with abs can any one tell me where the vacuum pipe from the servo goes many thanks terry

fitting a 3.9 efi no subsitute for cubic inches tazza

log book has 17hxxxxxc but block has 366xxxxxx i think someone has fitted a 2.25 diesel block with a recon unleaded head at sometime

hi ive just removed my 2.5 petrol engine from my d reg 90 the engine number is 366 2219xx can anyone tell me why its listed as a Series III diesel 2286cc 5-bearing many thanks terry

hi iam in about to convert my 2.5 petrol 90 to a 3.9 v8 efi with a zf auto and b/w tcase. can anyone tell me if i can use the original gearbox mounting holes in the 90 chassis and weld the engine mounts to suit the new position or have i got to mount the box and engine from scratch. thanks in advance taz