Hobbsy89

Thanks for the help mate. If it thought something was open would the interior lights not be on?

Can any one help my galv rebuild is back together and the central locking won’t work it didn’t work before I started but read on the net that this YWC106280 10AS is the central locking module. Any one have any ideas if it’s fused or has a relay? Immobiliser is working fine. Also interior light doesn’t come on when door is open but comes on when you turn it on so could that be fuse related? Have a wire under seat box that’s not going to anything as you can see in picture is this anything to do with anything?

Thanks For your reply mate. To be honest no the central locking never worked but when I brought it I was told it had central locking and electric windows the windows are all working just nothing with the central locking just a immobiliser. Is there anything I can check to even see if it does have central locking. I have just put Puma doors on and the loom inside them was the same as my old doors there’s wires going to the locking mechanism 2 got to locking mechanism and 2 to the Electric windows thanks Dan

I recently brought a td5 90 county station wagon and am currently rebuilding on a galvanised chassis. The key fob will turn the immobiliser on and off but the central locking doesn’t seem to work would any one have any ideas why this is or what to check?

Thanks for your reply mate. I can have a complete bulkhead and heater etc just wondering weather to take up the offer and “try to” install it

Hi I have been searching internet high and low and can’t really find a sensible post about fitting a puma dash and bulkhead into a 2002 defender td5 am doing a galvy chassis rebuild and can buy a reasonable priced complete bulk head. Does any one have any advice or sensible post to read about the dos and don’t and what you need etc? Thanks in advance.

Can any one give any help on sealing a set of rolled edge Mach 5 beadlockers? What silicone are people using? High tensile bolts or any tricks? Any thing will be helpful sick of bolting them up and unbolting them! Just won't seem to seal