Theviper1987
-
Posts
63 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Theviper1987
-
-
Ok thanks everyone.
-
How do I transfer my existing map from megatuner to tuner studio? I've looked in the folder where I have saved it on mt using ts and it's not there???
-
Thanks. More silly questions to follow shortly.....
-
Is there a version I need to be looking for or is there only one?
-
Thanks all where do I find tuner studio
-
Is tuner studio better??
-
Is tuner studio better??
-
Sorry I'm using the megatune software off diyautotune
-
Hi all I have got my truck running and all timed up right... Hooray?????????? right I am very new to the whole Megasquirt and tuning but getting it slowly.
Right auto tune. Is it as easy as ve table 1- tools- auto tune. Then drive it hard/slow/cruising/ up hill/ downhill etc. then saving it.?? Thanks
-
Thanks all it turned out to be a dodgy edis unit. Swapped it with another and she burst in to life!!
-
Hi I'm 99% sure the edis8 has gone wrong somehow. I'm only getting 1 bright spark then after that they are half as bright out of the left hand side coil packs. I have tried swaping the 'a' & 'b' signal wires(at the edis end) round and then the spark moves across to the other side. I've double checked every wire and every connection. Uv got the vr sensor correct(one way round I get nothing no rpm or spark) the way it is now I get rpm and spark. Is there anything I could have over looked?? The battery is in charge and I'm getting a good 10+v while cranking. Crank rpm is around 140/150. Any help or ideas welcomed. Thanks
-
Hi all I'm pulling my hair out here. I have just fitted a Ms1 kit to my rover 4.2. Serp belt. I not getting a spark. I have got the vr sensor in the correct way. Iv got the battery on charge so I'm getting a good 10+v on cranking. Iv double checked all wiring. I did get it running for about 20 seconds the other night before it cut out. But now I have no spark again. Any ideas?? Thanks rob
Tuner studio
in MS-Megasquirt/Jolt
Posted
Right when I on tick over the a/f number is figure is 14.9 when when I drive the number dies to 9.00 then when I coast it pops back to 14.9 any ideas. Thanks