Copey89

Awesome, thanks for the advice guys, i will check it all in thd morning

Hey, i have an oil leak down the left hand side of my engine (as you look at it from the front) looking at it, the engine is a 200tdi engine, the leak looks like it might be from the oil cooler pipes, or that general oil filter area, i plan to rip apart the whole lot and replace every gasket and seal i can and was just wondering if anyone has a list of everything that could be replaced, just so i can order it all and get it done in one hit, or am i best buying a full bottom end gasket set, like this one http://www.ebay.co.uk/itm/Land-Rover-Defender-200-TDi-Full-Bottom-End-Gasket-Set-STC1557-STC363-/320835188843?hash=item4ab344786b:g:MGUAAOSwDuJW1xOA thanks for any help

The skins on mine are plastic, i can't comment on how they were to fit as they were fitted when I got the truck, but they fit great and you wouldn't know they were plastic to look at

ace, thought that may be the case, will check and see where anyh fluid has been lost, thanks for the help guys

Hey, I have a 1988 Landrover Defender 110 fitted with a 200tdi engine from a 1994 disco, the clutch pedal has gone very low and the bite is basically on the floor, to the point where it sometimes clunks going in to gear, checked the fluid and it was completely empty, topped it up and tried to bleed the system but nothing was coming out of the bleed nipple, is that sounding like it could be either the slave or master cylinder causing the problem? If either one could be the likely issue I will replace both of them Thanks for any advise

Thanks for that info Chicken Drumstick! Exactly what I needed to know, and thank you everyone else for the advice, the seats will be used for adults and older kids, so I will probably fit seat belts too, in all honesty they won't be used a massive amount, but it's just nice to have the option if I can legally, thanks again!

Sorry, defender 110 and I am in the UK, I can get the log book changed and my insurance are alright with the extra seats

Hahaha, fantastic

My defender currently only has the 3 front seats, I would like to stick a couple of inward facing seats in the back, I know that I will need to add in supports as the floor won't be strong enough, seat belts etc. But can I legally mount inward facing seats? I would guess so seeing as they come with bench seats? The vehicle in question is a 1988, thank you for any help and advice

Sorry if this is in the wrong place, does any body else keep ripping belt loops on the door shut when they are getting in their lifted defender? I have ripped 3 so far! I really should be more careful! Haha