Jump to content

xxxnumbnutzxxx

New Faces
  • Posts

    2
  • Joined

  • Last visited

Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. thanks for the reply solved the feed issue,fuse was fine, the cable was undamaged but just would not supply a voltage but connecting it to the other purple feed it shares a fuse with works fine ran all the tests again and everything worked as it should, put the switch in drivers side works fine passengers side - the side repeater didnt light up or flash ripped the wheel arch extension off to get to the wiring everything looked fine but luckily i had spare new repeater as i was planning to change it after a quick swap for 30 glorious seconds everything worked as it should i pushed the wiring back into the back into the wing, checked it of the switch again and the 15A fuse blew, put a 20A in worked for a few seconds and blew, tried a 25A just to see what happens and all the lights flashes very dull for a few seconds then stopped and the fuse got warm any help on what this means and what to try next would be greatly appreciated cheers
  2. hello, im having an issue with my 89 Ninety and was hoping someone could help me solve it my hazards and indicators have been a bit spotty since i bought my landrover a year ago but they completely stopped working on Saturday, after a few checks i thought it may be the flasher relay so ive replaced it with a new one, only its not fixed the issue following the checks on here all fuses are ok, im getting 12v to the purple permanent at the back of the connector and i have two different hazard switches that both worked in the past but arent now when connected on the first two tests from the purple permanent to either indicator im getting nothing, from the permanent to the flasher supply using the indicator stalk with ignition on again nothing happens for the second set of tests the light switch supply to either indicator the correct side lights up, then for the switch supply to the to the flasher supply using the indicator stalk each side flashes fine from the stalk so from this i gather the new relay works, the indicator stalk works, the wiring to the lights works the issue must be with the purple permanent but i cannot think of fix and im hoping someone here can shed some light on it please
×
×
  • Create New...

Important Information

We use cookies to ensure you get the best experience. By using our website you agree to our Cookie Policy