Hi again
before was CUX14 and distributor (motor work very poor and low power until 3500 rpm)
the injectors is new and fuel pressure adjuster change to 3 bar
the flow rate of injectors is 205 cc/min
the upper dead center of 1 piston is on 8 tooth
How can i rescale VE and ignition map for V8 3.9 ?
Hi, there are coil packs (wasted spark) and ckp sensor (the wheel is 36-1)
the spark and fuel maps i found in internet (i think that it should be for my motor? but i'm not sure)
there are for 3.9 and for 4.0 V8 that i found
Hi Fridge
i think that Secu3t it's light clone of megasquirt
U don't need to study it (sorry for bad english)
I just need help to know that i use correct VE and Ignition maps or not for this engine (v8 efi 3.9 L)
There is foto from Ladoga 2015
there is from Ladoga 2016
and here is video 15/08/2020
WhatsApp Video 2020-08-15 at 15.00.56.mp4
Hi guys.
Could somebody send VE and spark table maps
The engine is from Discovery I and auto transmittion ZF
V8 3.9 L (compression is 8,13:1)
the injectors is deka 1d zmz 6354
it's defender build to sport (trophy TR-2)
there are some pictures of manager and wire shema
Now the engine start after 8-12 sec. and there is low power until 2800 rpm, yeasterday it's make 0-80km/h about 12,5 sec