-
Posts
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by Falklandislander2003
-
-
Hello All
I've took on a Series 2 with a 2.25 petrel engine and was thinking about doing a engine overhaul,
Has anyone done one before? Are there any tricks that i should be aware of?
Cheers
Tom
-
Thanks all I will try to brush up earths and tighten if necessary and also check the fuse holder as FridgeFreezer has said
Cheers
Tom
-
Hello all
With the coming months its become much darker in the mornings down here in the Falkland islands and i often use my head lights going to work in the morning
but I switch them on this morning and one comes on at normal brightness while the other is much dimmer
is it just the bulb going? What's happening?
Cheers Tom
-
Hi guys
I’ve just looked at a 110 200tdi for a mate and it’s been an experience
The sequence goes
start engine
turn all lights on
apply foot brake
turn key to off
engine still runs
take foot off brake
engine stops
pump foot brake
headlights flash
Help me guys I’m completely lost
cheers Tom
-
Hi Tim
by large service what do you mean? What was replaced? was it a reconditioned turbo?
I dont know the pumas as well as the old girls but when my old discovery 200 tdi lost power i had issues with my lift pump and fuel filter
could be a faulty pump at the rear?
Hope this helpe
cheers Tom
-
cheers monkie
also since I'm still a beginner where is the switch on the gearbox?
cheers
tom
-
Just out of curiosity how difficult is it to put a new reverse light in? There is no original unit on the rover for some reason 🤷♂️
cheers
tom
-
On 3/16/2021 at 9:03 AM, western said:
Grab it, also do you know our famous BogMonster he on FI too.
BogMonster? Can you send me a link to his profile?
-
mines without a cowl but mines a disco 200 tdi in a 1990 110 don't know if that makes any difference
-
-
You know those senior moments you have...
it was the damn hazard switch
it works like an isolator for my indicators and it was bloody off!!!!
😂😂😂
Sorry guys
-
Thanks Western
any tip offs to where the earths are located for indicators
if it is not the earths is there anything else it could be
cheers Tom
-
Hey guys tom again
so my indicators died on me mysteriously
I've traced back the indicator wires from each indicator light back to the relay and I've changed the relay but still nothing what have i missed?
Could it be the actual unit in the steering column that gone?
Cheers tom
-
Hey guys
has anyone else got a message like this before?
Not sure if its a scam or not
cheers Tom
Click to participate https://form.gifts/ (or highlight the link and copy it into the browser address bar)
Good luck. -
Firstly im an absolute begginer in this gig so here we go
Radiator seems to be in good condition, Western cant see that any fins have disintegrated
Stellaghost, as stupid as this seems i dont actually know where the thermostat is in the engine bay
cheers
Tom
-
Hello all
I have a 200 tdi 110 and she appears to have a heat problem
after about half an hour of running shes below the red on the temperature gauge
doesnt seem to have any difference to the engines running
she has a turly turbo fitted so i dont know if thats making the engine more hot
suggestions please
cheers Tom
-
Hi guys
my 110, 200 tdi has the old style brake drums on the rear axle
was just wanted to know if it is possible to convert to the newer style brake discs or not
just wanted to know if it was possible before ordering the parts
cheers Tom
-
21 hours ago, western said:
Same starter motor as the 200Tdi engine, check the small white/red trace cable is connected to the solenoid spade terminal nice & tightly.
good to know cheers man
- 1
-
Hey guys I've got a bit of a dilemma here
Im fixing up the old 2.5 110 down here and i put a fresh battery in her yesterday turned the key and nothing
was going to put a jump lead straight onto the starter solenoid but not sure if its similar to the 200 tdi
suggestions?
Fitting the Roof
in Defender Forum (1983 - 2016)
Posted
Hello all!
Ive now got to the stage in my rebuild we’re in putting my cab back on my back box
this is a full cab defender 90
is there any need for rubber bushes or can I just bolt them straight on?
any help would be appreciated
many thanks