honitonhobbit
-
Posts
2,836 -
Joined
-
Last visited
-
Days Won
19
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by honitonhobbit
-
-
Max allowable roof load (dynamic) for a D1 is 65kgs
-
We only set up the website two days before the show - for £2.49
Eventually the website will have information and ideas on it. We are also looking at producing a range of useful stuff in conjunction with a couple of sponsors...
-
We had a stand again. It was very successful. We also had a great time - my liver may recover
Best AO yet - finally less of the "charge what we like, some mug will pay" crowd, lots of bargains. Some great stuff. Superb social scene. We'll be back for the September
Our no expense spent site is at www.beardies.co.uk
-
1
-
-
Buy the HG fromElring direct - lots of copies floating around. It's hard to mess up a 200 ,but it's nice to upgrade it a bit.
-
Been pulling timber around for a very long time now. Still run big clearance ops. Most contractors don't use Hydraulic or pto on little vehicles like Land Rovers. No point. Firstly hydraulic is for big timber, most of which is heavier than a 110/130; secondly it's blessed expensive and a pita to fit, needs moremaintenace and the parts are expensive. A decent, well made winch like the TDS 12k will work all day pulling small stuff (up to 18"), is very efficient in it's current draw, easy to maintain and easy to fix and the parts are cheap. Even our plant trailers run electric winches... Even a Winchmax 13k is good for all day working logs; slow and steady
-
On 25/02/2018 at 9:02 AM, MECCANO said:
I presume this applies to any chassis modifications. For example, foley doing a 3rd axle extension, even if the rest of the vehicle is original.
Foley have been exempt form legaiity for years
-
1
-
-
Britpart are the only supplier of LR parts to offer a two year warrantee - without the need for professional fitting
-
No cost, but feel free to donate to the Forum.
Oddly enough, I also have 80m of steel rope...
-
Oh, and I forgot, if you want an X9, I have some
-
I have a working,but needs love, Pierce on my bench. It's barely 14k lbs, but you are welcome to it. It was a kind gift from a Dutchman on here, so it's yours if you want it. Gratis
Worm drive and ideal for sedate but massive recovery
Also got a Husky 8000 in bits in a box - but money will have to change hands as is owes me. Not much, but I need to pay the same Dutch man for what he paid for it...
-
Worth noting FFOR now close on Friday
JimBob at Gigglepin does a good motor gasket, worth the pennies
-
1
-
-
love watching idiots do recovery
-
1
-
-
On 16/12/2017 at 12:31 PM, Tanuki said:
The "commercial" one in those photos looks nice: now let's hope that they produce a version with a petrol engine and manual transmission! A nice DOHC straight-six or V6, about 3 litres, with a low-pressure turbo or two...
I've come to the conclusion that for anyone buying a vehicle that they intend to keep for more than a few years, Diesel is well and truly dead: all the fretting about particulate-pollution means we can be sure there will be significant hikes in first-registration-tax and yearly VED for Diesel vehicles along with Diesel fuel-duty going up significantly faster than the duty on petrol.And then the news this week
-
My cheap carp front springs have sagged to the point where the tyres are rubbing on the arches on full articulation. I've got 764's on the rear, with 18mm of spacers. I'm thinkig of going 764's on the front for a 1.5" lift and bettr weight carrying... Any comments/suggestions?
I run a relatively lightweight winch bumper and a G10, I've swapped back to silly string, no silly bash plate. I run 245/75x16's, soon to be on standar disco rims to bring them back inside the arches more. RAW4x4 Shocks, SuperPro Bushes (not castor correction), standard arms....
-
You canget good power and torque out of a 2.25 petrol. You can also make it bigger without anyone knowing...
-
Rust - if it's metal it will rust. Everywhere. Anything that moves, holds fluid, is a conduit for electricity, seals, cools, generates, pumps, compresses fluids or gas, etc will go wrong, often
-
On 05/08/2017 at 5:26 PM, mmgemini said:
I take it that means cider ?
Hell aye
-
I have a 'Stand' again. More of a social center than a stand; and not for teetotalers. Drop in if you want. It'll be under the Budget Overland banner
-
What kind of time frame? I have to collect the V10 within a couple of months. It's in Chester. Reckon an axle would fit in the back
-
We were looking at this yesterday
-
With an MoT coming up, I've been checking out my '93 model year prior to the test as I really hate it failing. I've had a few issues over the last few months with the indicator dash warning light. Firstly it got a bit random and then failed completely. However the trailer warning light was fine. No indicator warning light is an MOT fail
Replacing the bulb is not straightforward. It's a total pain in the backside unless you have 8" long fingers, each equipped with an extra knuckle. I had to take the binnacle apart anyway to remove unused radio switches and to replace two back light bulbs (Lucas LLB286 12v/1.2w and available in LED form ). The binnacle is easy to take apart - four screws, two under the top lip above the instrument cluster and two under the bottom lip below the instrument cluster. To swap the warning light bulbs out , you need to remove the four retaining screws for the cluster then gently bend up the metal frame to slide the lugs out AND undo the speedo cable. This is a bit fiddly.
BUT and it's a big but, before you do this pick up a spare flasher relay - preferably Hella but the Bearmach option is quite well made - and swap out the old one. This is a five minute job. The unit is behind the panel that accesses the fuses and is on the RHS of the steering column. bend the mound towards you to make it easy to slip the old relay out. You'll most likely find that sorts your problem!
-
They used to make good copies, but like so much now, the quality has really gone down
-
I know. It's quite frustrating to have found something that you know is right, that does the job properly and doesn't cost the earth; then to have it simply disappear due to lack of sales/interest.
Britpart do make a copy but it's really not very good, goes soft really quick
-
Forby "boost ring" anyone?
in Discovery Forum
Posted
I'm all for it. It's upped the value of second hand engines by at least 200quid and I've got second hand engines for sale