voevod
-
Posts
102 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by voevod
-
-
cheers for that western,that's a really guid thread.Will attempt that in the morning
-
my near-side tyre at the front has worn down it's outer edge to the point that it'll have to be replaced soon(running on general grabber at2 235/85/16s).The tracking was done a year ago and I was told it was only just out,but still got charged £50!All balljoints have been replaced,as have railko bushes,no movement in the wheel top and bottom.It does seem to wander very slightly,but I've put that down to radius arm bushes being worn,which I'll do this weekend along with the trailing arm bushes.I removed my steering guard as I felt it was too close to my drag link tube and found it had slightly damaged the clamps on the off-side of the tube...is there any foolproof way of checking if the tracking is out?I'm unwilling to throw this cowboy another £50,but he's the only person I've found who'll look at a defender.I've been told there is a string method,but am unsure how it works.I've run out of ideas as to what else it could be
-
haven't done any offroading for a couple of years really,unless pollok park counts!
-
nice clean chassis that..what shocks have you got on the front need4speed?
-
I would also check your drop arm ball joint for wear
-
I think if you had the 1.66 t/box,you would be struggling to get over 50mph in a 200tdi.I inadvisedly fitted one a year or so ago to my 110 and the engine I had at the time was screaming its guts out at this speed.I can only think that what you've got is a 2.5 n/a(which I assume was the original engine as supplied to the MOD),which should be capable of 65/70 mph quite comfortably,but not much more
-
you interested in selling your benchseats?
-
if it's this
...it's a sill panel
-
I had much the same problem,although I was fortunate enough to know someone that had a fairly low mileage disco1 engine,g/box and 1.22 t/box for a car booty price,so I swapped the lot
-
a worthy addition for the extra money if you're taking the box out anyway need4speed.I have a feeling the gear with the longer spines may be to marry up to an R380 g/box,but may be wrong.Ashcrofts will definitely be able to help you if you have the t/box id handy
-
wow,that's a lot of money...I was going to say don't forget the collapsible spacer tube,but it's in the kit.Out of interest,can you fit a cross-drilled input gear into any t/box,assuming it has 26 teeth?If so,I'd be spending an extra few quid getting one while ye have it's guts oot on your workbench
-
..and I'd prime it a few times before fitting
-
well,I found out that it's M16x1.5 thread on the disco sender,so I'm going to drill a hole through my old one and retain the outer thread,put a 1/8NPT tap in and screw the VDO one inside...in theory!
I was quite surprised as well,they were helpful enough the other day
-
well that went well..just off the phone to steve parker and they
a)have no idea if the sender is compatible with vdo gauges,and
b)have no idea of the thread measurement of the sender they sent me
the one I took out of my engine is PRC9917(green collar)
does anyone know the thread measurement for this sender,so that I can order the right one to marry up with a VDO gauge?
-
Aye,I like those vdo gauges western.Think I'll give 'em a phone in the morning and see if they're compatible,can't see it though.Fingers crossed
-
I can never seem to find stuff I'm looking for on e-bay(age!).I'm needing the whole units replacing as the towers that hold the screws are hanging by a thread and the lenses wouldn't look out of place on a dali painting.I'll probably get 4 sidelight units and fit orange chrome bulbs to two of them.
-
my lights,units,lenses all need replacing at the front,but I fancied clear lenses with orange bulbs for my indicators.Paddock sell these(XBD100670),although the lens is set into the unit,so if the lens cracks you have to replace the whole thin.They're also very expensive...same lights as on a late bodied old mini cooper IIRC.Could I just buy four sidelight units(RTC5012),fit the two bottom ones with orange bulbs and save myself £20?Is this even legal?
-
sorry to revive this thread...have got a temp sensor winging it's way to me from steve parker that'll match both(disco's)engine and my 110's dash.I'd ideally like to have a little more accuracy with the temp than a thick white band and narrow red band as supplied by land rover.Could I fit a TIM water temp gauge(with numbers!!!) with this new sensor or will it only match this particular lr defender gauge?If they are compatible,is it a straight swap using the existing wiring?
thanks
voevod
-
you should be able to do 70mph all day long...sounds like a pub story to me
-
this is the best I could manage
-
cheers western,I'll try that...just found a pinhole in ma front diff,driveway covered etc,you fix one thing and...
-
its supposed to light up with the ignition western,its got a smoked screen which makes the needle and dial invisible til start up...just trying to find me damn camera!!!
-
just an update...led is fitted and looking good...
turbo boost gauge here as well,however the wiring is confusing to me
orange-12v dash lighting(so I plumb in to next door gauge's red wire)
black-vehicle earth(next door's black wire or bulkhead)
white-12v ignition switch???
so pardon my electrickery ignorance,but what wire is the ignition switch?
-
thanks folks,I'll see if I've still got the defender one...problem solved
Bolt that holds panhard rod etc....
in Defender Forum (1983 - 2016)
Posted
you must be getting some amount of judder through your steering without that bolt