3spins

With the damage of broken shafts, steering wheel and punctures decided to start the winter strip down early, so won't be able to make this event, sorry Chris. Looks like spending some money and purchasing some ashcroft shafts. Going to move the rad and shorten the front, maybe move the axle forward as well. Move the rear axle back and extend the trailing arms to the middle.

The Brave We'll try and make a day of it this time, fitted a new lift pump. Might get to 3 punches

What can I say, I put an engine and box in from my own daily runner so I know it's good and NEVER let me down and what's it done let me down Thanks for everyone's help and what we saw from the 3 punches we tried to get to, they were well set out for us, come away with only 2 punched though . Finally got it running somewhere right at around 3pm but decided to call it a day, once again thanks to all the organiser's and those that helped us out, got an elecy pump here from someone to give back. We still had a laugh though that's the main thing :lol: Thanks to All

Stonkin weekend, nice one can't wait to get stonked see you there

Yippee, got the new engine and auto box fitted. Need to run it round to make sure I've not left anything loose but yeah we should be there for a shakedown

The bogs might be a bit deep though. Slippy? just a bit, easier to drive than walk. see you there Whoops pressed the post button twice, it's not the beer honest

The bogs might be a bit deep though. Slippy? just a bit, easier to drive than walk. see you there

Look forward to the lie in bed instead October good for us will be a busy time though with lrs as well but I'm sure my winch bitch will cope

I can remember coming across the narrow bridge from the A490 to a Tarmac road, Farm in front of you with camping to the left (as on Si's map) and trailer parking on the right. I'll follow the orange Arrows Truck dried out and repaired so ready to go, I think. Looking forward to this one not been there for ages. Bob....... can you bring my strop with you please that you found

Just need to dry my truck out and get it repaired and I'm sorted. Will be there Sunday morning eager to try to last a full day Only been there once before, you got a map or postcode Chris to refresh my memory? Got a new Bitch but is of MSA club(viking) this be ok? Dan Taylor Gary.

Thanks, is it the same one Bob found? See you at R2 if were not flooded out

When we had our small roll and got rescued back onto our wheels (cheers lads) we left a green strop, yellow hook/ring if anyone found it can you bring to next event please. Thanks Webby for the use of your half shaft magnet Have you found out what rad it is yet?

Great once again, thanks to every one setting up and to those who helped us pull the truck back of on it's wheels still learning the hard way but we'll get there. Cheers, Gary.

Entry form filled in and posted a while back, waiting to see if I'm in and not too late Gary.

:hysterical: take a bit more than that 'reel em in a bit more' I've used solvent joints on the roll cage as they don't do a 50mm push in fitting. Hope this will be ok for scrutaneering