Francisco-Rey

Hi Does anyone have the drawing of the cut in the side panel to instal a Mantec snorkel im a Discovery 300tdi? Hug

Hi I have just bought one of these toys. After much research and ideas "'it's done"! Now one or more questions: considering that the increase in height will bring all those problems of change the midpoint of gravity and bla bla bla, and looking at the size / weight of the tent and the Discovery, with attention to the front of the roof that is lower than the rear and, that the medium of the Discovery is more or less over the front doors wouldn't be more logical set up the tent in this area instead of riding it in the back? There wouldn't be more balanced and distributed weight? Being in this place the greatest distance between the tent and the roof will cause more or less friction? I look forward theories! Hugs

Thanks by the fast answers! Teabag, it's a Discovery I (1995)

Hi Can any one tell me if there is any problem in taking the Front Propshaft for more or less 80 miles, during the time I change both of the Front Propshaft UJ ??? Ty

Hi I get some strange vibrations between 80Km/h and 110km/h when the car is in 4th or 5th gear but if I take it whit any gear, driving down some road for ex., it doesn't make any noise or vibrations. Can any one get me some sugestions of what can it be? Cheers

Thanks Baz i wil be waiting, I'm allready taking some ideas from what I see arround here Chers

Hi from Portugal again I'm pretending to make a Steering Guard for my Discovery I - 300Tdi, is it possible that some one tell me the dimensions of it, or even better let me see the draws of it? I know that there are a lot of models but what I'm pretending is just a regular model for the original bumper nothing very complicated and easy to make. Cheers Francisco

Hi By the moment I'm looking for the draws of a front steering guard to make one for my Discovery I does any one have some informations about? Cheers

After some search here they are soe pics of "...use gutter feet but moreover it appears to bolt through the roof itself, (perhaps to the internal rollcage??) ""

Yes you are right: "".... it must weigh a tonne with 5mm walled inch tubing"" and it realy works like ""... roof rack was designed to act as a form of ROPS?? on the actual camels it seems it doesnt use gutter feet but moreover it appears to bolt through the roof itself, (perhaps to the internal rollcage??) "" Cheers

Here in Portugal we use to buy the feet in some car acessories shop like a not expensive roofbar, and use the interesting parts or use them as reference. I think that it could be easy to translate the legend of the drawnings but if you have any problem be free to contact. Cheers

Hi from Portugal I can send you some drawnings of one, the measures are in centimeters. I think that are based in a camel trophy Juste mail me in francisco-rey@iol<dot>pt Cheers