fats_40

well hello gents,more woes.i have p38 4.6 with 112000 on the clock.have recently replaced big ends on engine.the car was running fine until this morning when it started to miss a beat on acceleration.once you get up to speed ,ie,30 plus there is no problems at all.ive bought new spark plugs,leads and changed them over but the problem is still there.it seems to hesitate then its fine but this only happens on pulling away.any ideas will be tried.thanks

i am attenpting to replace the big end mains and bearings on p38 .could anybody advise me if they are straight foward to do.engine rumbles when starting up.have been told big ends and mains.112000 miles on clock.thanks

have a p38 4.6 with 111.000 on the clock.when you start it in the mornings you get a knocking from the bottom end of the engine.thought the cats were knackered but they are fine.have been told it could be crank shells.can anybody advise me if this is a common problem on rangies and are they easy to do.also can they be accesed with engine in car.thanks

its a p38 v8 just left it on tickover and have pressure in system,topped up with water cannot see any leaks but am thinking water pump.going out to wobble pump.will report back.thanks

temp warning light came on for about 10 mins,manage to get home,cant find any leaks bot it sounded a bit ratterley when doing 20 mph.put about 10 litres of wa ter in it but unable to see where its going.poss water pump?any ideas.thanks

thanks for reply im using 15/40 oil .i serviced it about 2 months ago the milage is 110.000. i thought about putting thicker oil in .wot u think?

when starting my p38,i have noticed a rumbling sound coming from the bottom half of the engine.when its warmed up the sound almost dissapears.any ideas?

i have rear half shafts for p38 .if you intrested you can contact me on 07886904887 after 10.00 am.