[Cv joints, and drilled and groved discs.]

I suppose they would fill with mud.

[Cv joints, and drilled and groved discs.]

Thanks i thought i would get more stopping power with drilled and grooved.

[Cv joints, and drilled and groved discs.]

Hi i need to change my cv joints 24 spline on my disco, are brit part ok in this area or should i use another make? And while its all off i want to change my front discs for drilled and grooved, looking at the ebc ones from paddocks. Are these ok or should i use another make? Chris

[Spy Shots - A very special Td5 turbo]

Sounds good, i'll put my disco up for project 300tdi if you need one.

[300tdi starter motor.]

Hi thanks for the reply but i can get it off my disco but how do i take the starter motor to bits.

[300tdi starter motor.]

Hi all, i want to take my disco's starter motor apart to give it a claen as i think its sticking. I don't want to undo it and end up having it all fall to bits. So far i'v undone the two long nuts that go all the way through but the top would only lift up half inch. What else do i need to undo to get it apart? Thanks chris.

[Starting problem.]

Hi my battery is fine and it's not my spider i'v already had that done.

[Starting problem.]

Hello people, for a while now and then my 300tdi disco wont start. On turning the key i hear a click like the starter motor engages but then nuthing else. I'v cleand both ends od the earth lead and cleaned he battery earth. Am i in need of a new starter motor or could it be something else.

Chris

[Wanting to winch.]

Thanks for the replys. Does anybody know how i can get a copy of the msa blue book? Chris

[Wanting to winch.]

Ok thanks i'll have a look at them. Chris

[Wanting to winch.]

Hi me and a mate are wanting to do some winch challenges. Neither of us has done an event before and don't know who to talk to about getting into one. Would be greatfull for any help and pointers. Chris.

[Rubber Coupling]

Hi i have the same problem with my disco with a 3inch lift. I think the only solution is to buy a 200tdi prop and change the diff flange. Chris

[Rubber Coupling]

Hi i have the same proplem on my disco and i have a 3inch lift. The only solution is to get a 200tdi prop and change the diff flange. Chris