lacrits68 Posted January 22, 2020 Share Posted January 22, 2020 (edited) hello! Can anyone help me? I hade to change my speedo/rev counter cluster. the old one had a red jumpvire and the new one does not. what is funktion of this red wire? do i need to have it? it feeds current for dash light but why? whats the funktion of that little connector on back of plastic "box" behind of speedo? and an other this...oilpressure light WONT go on when ignition is on, but engine is not. Tested to ground connector, light comes on, so no fault there. oilpressure "sensor" is quite new, maybe 4 months...! //Jan Edited January 22, 2020 by lacrits68 Quote Link to comment Share on other sites More sharing options...
Europa Posted January 26, 2020 Share Posted January 26, 2020 In all probability it’s to bi pass a fault on the printed circuit, so if replacing the complete cluster you will not need it, it is certainly not standard, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.