ArtieC53 Posted February 8, 2023 Share Posted February 8, 2023 Hello everyone, I'm a newbee. I'm changing the front hub bearings on my 2008 Freelander 2 some time and was wondering if anyone would know wether 6 6 ton bearing press would be enough to remove/install the bearings. Thanks in anticipation. Quote Link to comment Share on other sites More sharing options...
ArtieC53 Posted February 8, 2023 Author Share Posted February 8, 2023 Sorry, that's 6 ton not 66 ton!!!! Quote Link to comment Share on other sites More sharing options...
Escape Posted February 8, 2023 Share Posted February 8, 2023 If you're lucky, 6 ton will suffice. But I've seen a 20 ton press fail to get a Range Rover bearing out... Can't hurt to try of course. Do make sure everything is properly supported and you're pressing on the right parts in the right direction. If it's like the later Range Rovers etc, you'll need to press out the center with the hub before you can reach the bearing center. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.