smo Posted July 31, 2007 Share Posted July 31, 2007 What sort of ram (size etc) do i need for a hydro-assist conversion on a defender based vehicle, also where would i get one from? Thanks Quote Link to comment Share on other sites More sharing options...
Steve 90 Posted July 31, 2007 Share Posted July 31, 2007 Got mine from Tim Farley at straight forward suplies, Spot on really, does the job and is strong and simple! Quote Link to comment Share on other sites More sharing options...
smo Posted July 31, 2007 Author Share Posted July 31, 2007 I've read mixed reports on SFS so was hoping to source one myself but need to know what to look for! Quote Link to comment Share on other sites More sharing options...
Steve 90 Posted July 31, 2007 Share Posted July 31, 2007 Ive delt wit them a fair bit now and to be honnest had no trouble's. The first set of bead locks I had were sent direct from the laser cutter, I was in a hurry for them and Tim did this to try and speed the process up but they sent the wrong size (even tho the right size was on the paperwork which was enclosed with it) which couldn't be help'd, just one of those mistakes that everyone makes from time to time and in no way was Tims fault. Other than that everything has been fine and Tim has always been helpfull and real tidy. Ive had a lot lot worse service from bigger and supposedly better company's! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.