Joseph Posted March 19, 2008 Share Posted March 19, 2008 Hi all, Im at the point where id like to start experimenting with my 97 Disco. What id really like to do is tear out the second row bench seat and install 2 full sized seats in its place. Perhaps even push the seats back a bit and allow them to be easily removed for more cargo room. I've been searching for a mod like that but cant find anything. This isn't as drastic as some go with the traybacks but id rather not get into that yet cause i dont have welding equipment. Anyone seen anything like this? Thanks, Joe Quote Link to comment Share on other sites More sharing options...
Mark Posted March 20, 2008 Share Posted March 20, 2008 Never seen it, but i strongly considered doing this myself recently. I can't see it being a problem to install 2 seats in the back botled down through the floor, possibly with spreader plates. I also thought about using my existing load rail, as that is waht is used to hold aircraft seats doen - this would then make them removable pretty easily. I figured they should be installed such that the standard 3 point seat belts could be utilised. Quote Link to comment Share on other sites More sharing options...
landroversforever Posted March 20, 2008 Share Posted March 20, 2008 There was one in LRM last year, i will dig it out when i get home. Its the greeny/bluey one on the cover. Quote Link to comment Share on other sites More sharing options...
Mark Posted March 20, 2008 Share Posted March 20, 2008 Why not get a couple of discovery front seats and install those? the runners install on a flat base so should be dead easy to bolt down, and will math the fronts then too... unless of course you specifically want buckets I guess... Quote Link to comment Share on other sites More sharing options...
Joseph Posted March 20, 2008 Author Share Posted March 20, 2008 Yeah, front seats is what i was thinking, just to get it all to match. I know i can pick up two from a scrapyard for around 300 US. As this is my first real mod, just wanted some input. Thanks for the replies! Joe Quote Link to comment Share on other sites More sharing options...
landroversforever Posted March 20, 2008 Share Posted March 20, 2008 LRM August 2007...only one small picture and only shows one seat, not any of the mountings. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.