goldfish Posted February 3, 2009 Share Posted February 3, 2009 Hi Guys Does anybody know where about in the loom the nearside indicator splits from the repeater. I appear to have a wiring fault only effecting the front nearside indicator. Quote Link to comment Share on other sites More sharing options...
goldfish Posted February 3, 2009 Author Share Posted February 3, 2009 Hi I've got a wiring fault on my indicators. My rear and repeater are ok but not the front indicator. Does anyone know where on the loom the front indicator breaks away from the repeater. Cheers Quote Link to comment Share on other sites More sharing options...
BogMonster Posted February 3, 2009 Share Posted February 3, 2009 2 similar posts merged Quote Link to comment Share on other sites More sharing options...
Mark Posted February 3, 2009 Share Posted February 3, 2009 The loom splis under the dash - can't say exactly where I am afraid, but the repeater feed comes through the inner wing around the level of the dash board, whereas the front indicators come trought he bulkhead on one of the multiway connectors on the passenger side, and then along each inner wing and out to the indicator units. I would guess they spilt somewhere around the passenger footwell, as that is where the big multiway connector is to g through the bulkhead. hth Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.