muddychris300tdi Posted February 16, 2009 Share Posted February 16, 2009 Hi all, i want to take my disco's starter motor apart to give it a claen as i think its sticking. I don't want to undo it and end up having it all fall to bits. So far i'v undone the two long nuts that go all the way through but the top would only lift up half inch. What else do i need to undo to get it apart? Thanks chris. Quote Link to comment Share on other sites More sharing options...
cipx2 Posted February 16, 2009 Share Posted February 16, 2009 There's a thread in the tech archive on this subject - Discovery 300tdi starter motor replacement. Quote Link to comment Share on other sites More sharing options...
muddychris300tdi Posted February 16, 2009 Author Share Posted February 16, 2009 Hi thanks for the reply but i can get it off my disco but how do i take the starter motor to bits. Quote Link to comment Share on other sites More sharing options...
cipx2 Posted February 16, 2009 Share Posted February 16, 2009 Oops, now I got it. Here's some diagrams that should help. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.