FL1800 Posted January 30, 2010 Share Posted January 30, 2010 Hi, my dad got his problems sorted with not starting, however he was coming back from his brothers the other day and the clutch went to the floor, and stayed there. I'm guessing/hoping that this is just the hydraulics and not the actual clutch. It's a year 2000 , month 09 , Freelander 1800 Xi. We've browsed forums, but can't be a 100% sure which clutch cylinder set up it is, did they change in 2000? He's on at me to get it sold for him as is, but I was hoping I may be able to get it fixed first as he will loose a lot of money as he's just had it serviced, new cam belt, brake discs etc. TIA Quote Link to comment Share on other sites More sharing options...
Billy Whizz Posted January 30, 2010 Share Posted January 30, 2010 move air filter housing and look at front of gear box see if you see a black plastic slave cylinder if so that may be the problem but clutch arm can sieze in gear box but probably hydrolics comes complete pre bled with master cylinder costs about £100 Quote Link to comment Share on other sites More sharing options...
KarlNS Posted January 31, 2010 Share Posted January 31, 2010 Hi I had same problem and it was the slave cylinder cost £150 at garage to replace. Quote Link to comment Share on other sites More sharing options...
FL1800 Posted January 31, 2010 Author Share Posted January 31, 2010 Many thanks guys, will pass this on, he's going to have a look tomorrow, and either try and get it fixed or sell as is. Wish I had the cash as I think its a lovely motor and then get it done myself. Thanks again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.