craig Posted March 4, 2010 Share Posted March 4, 2010 on my 300 tdi the normal position of the gear stick is between 1st and 2nd not 3rd and 4th like nornal, i assume 3rd and 4th is normal??? anyway i have all the covers off as the diff lock lever needs adjustment, is there any way of adjusting the 2 springs which hold the gear stick in its neutral position? hope this makes sense....... craig Quote Link to comment Share on other sites More sharing options...
ches Posted March 4, 2010 Share Posted March 4, 2010 the bias plate should look like this http://www.lrseries.com/shop/product/listing/6737/3034/17/FRC9340-PLATE-GEAR-SELECTOR-BIAS-SPRING.html the upright part usually snaps off. Quote Link to comment Share on other sites More sharing options...
craig Posted March 4, 2010 Author Share Posted March 4, 2010 thanks it makes sense now. the upright piece had snapped off. Quote Link to comment Share on other sites More sharing options...
craig Posted March 6, 2010 Author Share Posted March 6, 2010 welded the snapped off piece back on today, all is well again :-) cheers Quote Link to comment Share on other sites More sharing options...
Les Henson Posted March 7, 2010 Share Posted March 7, 2010 Seems to be a fairly common problem Les. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.