standard eight Posted August 14, 2010 Share Posted August 14, 2010 Please help, think I have made an error somewhere. Recently stripped down the gear change linkage tx linkage to replace the gaskets and oil seals due to oil leaks. Now in fifth, and a lesser extent down through the others there is a horrible vibration. I have a nasty feeling that I have failed to get a bit of it back together correctly, oh s&%t!! Please please help a simpleton. Quote Link to comment Share on other sites More sharing options...
101sean Posted August 15, 2010 Share Posted August 15, 2010 Sort of thing that's difficult to diagnose remotely! I assume you've touched nothing internal to the main box? I'd backtrack over what you've done to check you haven't forgotten, shifted or trapped something. Also have you disturbed the detent springs that keep the main stick aligned to 3/4th? Quote Link to comment Share on other sites More sharing options...
standard eight Posted August 16, 2010 Author Share Posted August 16, 2010 Sort of thing that's difficult to diagnose remotely! I assume you've touched nothing internal to the main box? I'd backtrack over what you've done to check you haven't forgotten, shifted or trapped something. Also have you disturbed the detent springs that keep the main stick aligned to 3/4th? Hi Sean yes I did alter the springs to re-align the stick in 3/4th, thought I got it right but!!!! What are the consequenses of getting it wrong? As for internals no didn't touch anything accept where the linkage connects to the gearbox internals. Thanks for your time replying and sorry I haven't responded sooner, haven't got the notification thing set up right, all the best James Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.