stuck Posted December 28, 2010 Share Posted December 28, 2010 Forgive my ignorance Gents; I have a very broken RRC with a recent 3" suspension lift kit on it, just wondering if the suspension would fit my 110" TD5? RRC is currently parked in a mate's field a few miles away so I can't nip out and measure it all up. Cheers, Mick. P.S. RRC also has a "Shadow" winch bumper on it, any chance this will fit or will I need to get the grinder & welder out? Quote Link to comment Share on other sites More sharing options...
Retroanaconda Posted December 28, 2010 Share Posted December 28, 2010 Geometry-wise the suspension will be the same, however there are some differences: There are two sizes of radius arms in existence, a wider and a thinner type, it's possible there is a mismatch there. I'm assuming the lift kit includes radius arms if it's 3". Rear spring size, 110s have a larger diameter rear spring than a Range Rover, so they won't fit. There may well be other differences with regard to shock mounts etc. but the above is what I know to be the case. Remember that a 3" lift will alter the centre-of-gravity of your 110 considerably. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.