Finn Posted April 15, 2011 Share Posted April 15, 2011 Hey guys, today I stripped a defender pto. When putting it back together, I noticed that both driving plates (Nr 1 and 2 in the photo) are not tight together. How do I fasten them?? If I am not mistaken, I had 4 disk springs in there (nr 38 on the drawing). I fastened the location nut (nr. 41 in the drawing) quite tight. But still I can move both part 1 and 2 on the photo, back and forth.. I am confused.. Cheers, Finn Quote Link to comment Share on other sites More sharing options...
Finn Posted April 15, 2011 Author Share Posted April 15, 2011 whaaaahh.. I just found one of these large circlips on the floor.. (nr 12 in the drawing) I am going to shoot myself.. Quote Link to comment Share on other sites More sharing options...
brighouse shed Posted April 15, 2011 Share Posted April 15, 2011 whaaaahh.. I just found one of these large circlips on the floor.. (nr 12 in the drawing) I am going to shoot myself.. remember to put the bullets in.................. Quote Link to comment Share on other sites More sharing options...
Finn Posted April 16, 2011 Author Share Posted April 16, 2011 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.