smallfry Posted July 23, 2013 Share Posted July 23, 2013 I have a 1989 TD with shot front brakes................and my balls are past their best. I also have a 1995 Discovery front axle from a V8 I also have a new Polybush kit for the earlier narrow arms. I could swap the whole axle BUT the later axle uses the "wider" radius arms, and I dont have any........ And so, the questions are............... Is there any real worthwhile benefit in having the wider arms ? Meaning I would have to obtain some, and the obviously different bushes. Would it be better. Can I swap the swivel hubs/axleshafts/differential into my existing axle case ? Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted July 23, 2013 Share Posted July 23, 2013 The wider bushes last longer, and are more readily available. The arms aren't that hard to find! if you're anywhere near Dorset I have a pair you can have for £20! Quote Link to comment Share on other sites More sharing options...
smallfry Posted July 24, 2013 Author Share Posted July 24, 2013 Thanks for that Ron. Might take you up on that. Where abouts are you ? Quote Link to comment Share on other sites More sharing options...
Disco-Ron Posted July 25, 2013 Share Posted July 25, 2013 Pm sent Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.