Coo Posted October 29, 2013 Share Posted October 29, 2013 Hi folks, 1996 'P' Discovery 300tdi Clutch pedal is on the floor, have to switch engine off to engage gear. Had a look around, the master cylinder fluid is still topped up, cant see any leakage. Slave cylinder also appears leak free, pipes and unions dont appear to leak either. Is my problem sounding more like the rod through the clutch fork ? Thanks Quote Link to comment Share on other sites More sharing options...
ronnie_rotten Posted October 29, 2013 Share Posted October 29, 2013 If the pedal is solid and immovable, I'd say it sounds like the fork. Happened to me before and a mate last week. Very familiar sounding... Quote Link to comment Share on other sites More sharing options...
Coo Posted November 11, 2013 Author Share Posted November 11, 2013 The release bearing was fubarred... Dropped the box, long process but doable and then had to weld the chassis that was holed behind the crossmember plates ! New clutch in, handbrake adhusted, ready for a few more miles now ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.