pete3000 Posted May 17, 2016 Share Posted May 17, 2016 In final stages of helping a mate rebuild his 90, we ran into a minor "wheres that go then" moment on Saturday. 90 300tdi with 2 wire fuel sender green and black spade connectors on tank. (ok with this bit It's the two wire version with the end spade blanked off with a red bung). Then a short piece of loom from this around 4-5 feet long then finished in a black econoseal connector. Does anyone have any idea where the other econoseal end from the gauges drops out, we have the multiplugs on the bulkhead but can't track the fuel sender plug down. TIA Pete Quote Link to comment Share on other sites More sharing options...
pete3000 Posted May 18, 2016 Author Share Posted May 18, 2016 Guess no one has come across this one then, I'll trace it back from the cluster at the weekend, at least it's in the dry....... Quote Link to comment Share on other sites More sharing options...
pete3000 Posted May 23, 2016 Author Share Posted May 23, 2016 Resolved this hopefully, there are two black 3 pin green/black econoseals going backwards from bulkhead. (one to the fuel tank on short loom) and one which goes in loom to rear of LR through chassis. The one to rear if mated only the centre wire follows through, the outside wires are opposite sides of the mated shell. (not connected). So logic dictates this other connector is not used. Thinking it is for a rear tank version or a nas spec. From memory a 3 pin econoseal pops out by rear crossmember along with a round 2 pin socket which is also not used. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.