I don't drive hard and have spare halfshafts/diffs just in case, What tyre pressure could you let the boggers down to before they come off the rim? Ben
Hi, I tried wiring up 4 wipac 100w spotlights using two relays but am having no luck as to them turning on, Is the relay number 85 supposed to be earthed? Also I have number 86 going to one side of the switch and the other side of the switch earthed is this right? cheers. Ben
Steve 90 - you are right there why am I bothered about it on side slopes? it will tip over long before the tyres start to slide. I was thinking of beadlocks what ones would you reccommend? cheers. Ben
I am wanting to buy some new tyres but am unsure which ones to buy either 36'' Extreme Trekker 2 Or 37'' Super Swamper Bogger the only thing that puts me off the boggers is that I have heard it has no sideways grip any insight would be helpfull, They are for my range rover classic ,cheers. Ben
gwyn lewis looks like the way to go could I use these instead of getting new shocks? http://www.ekmpowershop2.com/ekmps/shops/c...r-kit-287-p.asp cheers. Ben
The bushes I have at the moment don't last very long and even when I put new one's in they still have lots of movement, I just had my MOT and got two advisories for the rear shock bushes and I only had them on for about 3 months if that, hopefully it will cure the problem, maby I could spray with wd40 or use hammerite to help keep the mud off? Ben
Hi, the D44 Swivel Shock Mounts will they fit my G reg 1989 range rover classic? cheers. Ben http://www.devon4x4.com/component/option,c...howcaticons,yes
Here is the part number,
speed transducer: PRC5956
you could try eBay thats where I got mine from only thing is, or you can give your local Land Rover dealer a call. Ben
Just found this link http://cgi.ebay.co.uk/LAND-RANGE-ROVER-EFI...id=p3286.c0.m14 only thing is you don't know if it workd untill you try it
Here is the photo of the transducer, I didn't use the longer grey/silver cable all I used was the short brown one that went into the back of the transferbox, cheers. Ben
Hi, I have just got 4 wipac 100w spot lights, I want all 4 on the same switch I ordered a kit that has: switch/wire/relay how do I do this? cheers. Ben
cheers for the reply, it does have hotwire but when I brought it the speedo didn't work, so I replaced the speedo binnacle which hasn't sorted it then I found out that the transducer wasn't connected for power/ecu as it already has hotwire I will assume that the wires are still there, where would a good place to look be? Ben
I have just got a new speed transducer with both cable's, only this one doesn't have the plug on the end of the power wires, one is coloured green the other is yellow where can I connect them? I can't use the orignal plug as it isn't connected and I don't know where it plugs in to, it's a 1989 rrc. cheers. Ben
Hi, I have a plug that is hanging from my speed transducer I think it is the speed
transducer electrical plug, where does this plug in to? my rrc is a 1989 cheers. Ben