crossy

Thinking cap on. Would a tramp/wrap bar fix the problem? (assuming it's even possible to fit one to a series front)

How come the toyota guys are swapping their shakles to the back ? There must be some good points with the LR setup..............

EDIS is the B) This is my setup. (holden six, not much relevence for you pommie guys) Its a very rough install - but works

QUOTE(Mark @ Jul 26 2006, 12:41 PM) yep, potting compound is the resin that you set the circuit in to protect it. 2-part epoxy (ie araldite) is sometimes used, but as roger says, it gets hot when curing, which isn't a good idea for soldered things. Mark ........................................ Its also a good idea to coat the electronics with a flexible paint (polyurethane or glyptol) before potting in epoxy. There can be problems with broken joints due to different heat expansion rates otherwise. Simon.

x2 It is a lot more mucking around, but it's the best option. No dizzy could ever come close to a well mapped ecu-dis setup. No more water proofing dramas. Welcome to the 21st century my edis setup. ps - where the fark is the finger smilie ?