-
Posts
700 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Posts posted by yella 90
-
-
everyone would know your cheating though G
as you spend too long with your car in daft positions to get more than 10 punches
-
worst i have personally seen was paul bass's car after his roll at the king of the valleys 2012, it completely destroyed his car and was actually hard to look at due to its history and seeing the car evolve over the years
dan
-
ive had a couple of good ones, one was a roll down a hill where i hit a rock on the way down
end result was a trashed rollcage
bent outrigger
bent bulkhead
and twisted cab
and most recently i did a backflip and landed upside down underwater which completely filled the cab.
cage did its job but water pressure shattered the screen and completely destroyed the roof and bonnet.
pictures of that little misshap actually found its way into land rover wold mag jan 2013 issue
-
this is going to sound stupid but, are the bleed holes clear ?
its not often you have to do such jobs on cars unlike landys.
i am kind of eliminating this myself though as it cant be possible for all of them to be blocked ??
maybe its the failed component thats causing the whole issue :-/ ......stating the obv
-
its an auto
else id say tow it as well
played with and own too many td5's !
-
you shouldnt need to put half a tank of diesel in to purge the system unless the fuel pump cant get a good suction supply on the lp side, which is usually because the main strainer on the fuel pump body it blocked
take the pipe off from the inlet manifold to intercooler and spray the easy start into there.
make sure you have also got another running car with jump leads attatched to it aswel as you need the fastest possible cranking speed.
another tip is to remove the glow plug relay and work the glow plugs via a jump wire, give them a good 30s of heat just like on the old n/a engines
if he doesnt get a massive arc when bridged then he is a glow plug or two down and this makes a big difference to trying to start the bugger when the bores are now washed with diesel from trying to start it.
-
unless fuel is flooding out of the regulator at the back where the diaphram is and where he thinks a vacume should be ( which the td5 doesnt have ... just a hole instead) he is wasting his time as this wont solve the problem
first thing is first, make sure there is enough fuel pressure
-
what vacume tube ?
if its the 10p engine which it should be as its a 99, there should only be 2 pipes on the regulator
feed in and then it comes out and down to the fuel cooler
-
pull the fuel pipe off the regulated side of the system i.e the return pipe down to the filter that comes off the fuel cooler. it should absolutely **** out and not just give a little dribble or steady flow.
ive got a pressure tester for td5's if your local to me.
-
daan thats banter between me and gordon im perfectly aware of what can break a halfshaft without you pointing it out !
-
he is running kam
the broken pile would be much worse in fairness but he isnt on his wheels often enough to do any more damage
-
im running 80 series land cruiser
im first to admit i have broken them
1cv through my own lazyness of not taking it out to de-burr as i knew they was tight
1front diff through being a complete and utter idiot trying to reverse up something that it didnt want to go up without the winch
-
land rover axles are old hat now and simply cannot cope with what is asked of them in the comp scene
i moved away a few years ago and quite simply have never looked back
-
have you tried going up through the gears manually ?
-
come on guys
its only a couple of weeks away now,
there is bags of time to get them fixed, i built mine from ground up in a week !
lets end this year on a high with pleanty of cars just like it started !
ill be back out to play, and hopefully this time i will stay on all 4 wheels although i cant promise much !
you might not want to miss out on this event as i hear through a " reliable " source that boothy is revealing his new prototype, although its not yet confirmed what this said prototype is for ????
see you there
dan
-
locking tool set for the tdi engines and td5 ?
with nice knurled handles ?
-
thank you for putting on yet another fantastic event with some great punches .
i did at one stage think i wasnt going to make it but at 2 am the car drove straight out of the workshop and up onto the trailer with no testing what so ever !
im over the moon that it lasted all day with no problems..... just the one behind the wheel who managed to end his own day at half 2 by backfliping on the special stage and landing upside down under water.
so all in all a great day i started the day by rolling on the very first punch, then ended the day with a backflip.
a special thankyou goes to sue, gemma and paul who looked after me while the car was recovered by team gunit who i'd also like to thank.
see you at rd 3
-
mines not built yet lol
-
so how do you pass with your heap ?
-
boothy, the only masterclass we will ever get from you is how to put a car back onto its wheels as thats all you can do !!
i wont even mention the twiggy trailer challenge ......
-
why whats your problem
i know him personally
-
you will find pleanty of events running
its the last mud monsters this weekend.
fancy a trip to south wales next week ??
king of the valleys is running
all the uk's top crews will be there, aswel as teams from the usa, malta
belgium poland and more.
you would be silly not to come and watch !
ill be there co driving as usual for john sales who produces the famous kick ass saley winch !
dan
-
my best advice is actually go to a few challenges and look at the cars, speak to crews and get some idea of why whe have done what we have done.
were all friendly and welcome new people to the sport.
dont take what your read on the internet as gospel as theres alot of people that can read stuff and think they know it but have never competed before, or have only done one season and are still learning.
where abouts are you based ?
-
you move the body back 2 inches so you get pleanty of room for 37"+ tyres
ibex 300 build
in Modified Vehicle Builds & Special Projects
Posted
good to see the new owner is on here, you had that off my friend.
was it easy enough to get it off the ramps ?