hambley84

Recently brought a 2007 tdci xs sw and its developed a bit of an issue , yesterday the battery and eml where flickering alternately on and the temp gauge to the max , today the battery light has come on and wont go off and temp is at the max and tho the eml is not on it is showing 3 faults and is a bit lethargic to drive ive checked all the fuse the battery is good and holding charge the alernator is kicking out 14.4 volt Connections on the battery are fine had anyone had this issue or know of anything like it ? any help would be greatly appreciated

I’m not entirely sure I know the ECU matches the chassis number I can take a look tomorrow I imagine it’s the original engine and it’s an 04 90 pick up

Not as far as I’m aware I bought the truck a few years back and never drove it just straightaway started stripping it I believe it’s all original as it’s only had two owners but I’m not hundred percent

Hi guy , wondering if any one could help me out? i have a td5 d90 i have just rebuilt and for some reason im having a couple issues it starts and drives fine , but even from a cold start the temp gauge is in the red soon as u turn the key , ive also noticed the fuel gauge is very slow i had a look last night and didnt get very far is the ment to be 12v at the sensor? also noticed that there is 2 grey plugs next to the master cylinder coming from the chassis but there’s only one coming out of the bulkhead?? I had another defender slightly newer and that has two grey connectors coming out of the bulkhead and two coming up on the chassis not the ones in the transmission tunnel I’m talking about the ones that flip right onto the master cylinder side. Any help Would be greatly appreciate

I had a South Africa guy send me a cheque for my old one , it was a really low quality cheque a step up from colouring pencils , took to HSBC ( friend works there) just because I wanted to see what they would say and ran the numbers and said don't even try to cash it left 10mins later got called back as the numbers came up in there fraud departments and they contacted the bank , so they guy called a couple days later , told him what happen in a not very polite way and within a week had another rubber cheque sent !!!! These people are relentless , but then they only have to fool one for a payday and there plenty of idiots about

Just brought a set of puma rear safari door hinges and what to repaint them , does anyone no if or how the come apart they don't have the screws in to top like the older style hinges

Looking to have my defender painted in Renault flame red , is it best to buy genuine paint or have it mixed/ made

I have a late td5 /tdci passenger door with e/w , I'm struggling to find a drives with e/w so my question is :- is it just the winder / motor that different or the whole inner door panel.? Can I just buy a door with a winder and just fit a motor in its place? Or would it need a different regulator

Well just checked the v5 and doesn't say anything about amount of seats or doors just says light 4x4 utility, do I guess as long as I tell my insurance it's a 6 seater 5 door everything will be good? Roof will need replacing as the old one is totally dead

Hi all Just after a bit of info regarding body changes, I have a 2003 td5 hd ex utility and im rebuilding it with a 5 door body , and can't find a clear answer to telling dvla/ process for changing details and registering as a sw/utility wagon It had a recon engine before I got it but as far as I'm aware everything else is original . It's stripped bk to a chassis at the moment and I'm trying to keep it as original as possible apart from tub,side panels doors, roof, wings, and interior upgrade to tdci rear seats using the correct cross member Could anyone point me in the right direction ? Cheers Ross

Not sure if they would keep you hands warm of if its just the rich people can't manage to keep there tdci's on the road there's about 30 on eBay breaking

. Pete at BAS?

Wow you are the go to guy and switch info thank you very much , I've been a little confused regards heat seat switches as come seam long and others seam tall if that makes sense I'm after the taller style but the £50 on line. This also explains why the disco hrw switch will not run my defender , so the defender switch you have to physically turn on and off? Where as the disco one is momentary ? I'm looking at buying a disco switch panel which has 4 e/w switches and 2 heated seat ones . So these will work in a def

Does anyone know if any switches are interchangeable between the disco td5 and the def td5, E/w Heated seats Rear Demister Front heated screen Cheers ross

Thanx I've used thes before, I know the set up I want just need to know how to remove the standard alarm system , getting conflicting stories some say it can be removed some say it can't and some say can be but only up to 02

Because I need to leave it running without the keys in it and I like having it

Because there is not enough spare ways on the alarm to have what I want and with the fob transducer there I can fit remote start as it won't pick up the fob

Mine was a sv but a didn't have central locking as standard all the dash is off at the moment but unsure how to go about disconnecting it all. I have some sort of coil sensor around the ignition that I think picks up the fob? So if I want il all removed I'd have to take it to main dealer

I have a 2003 d110 td5 and want some info on the fac fitted alarm, am i able to disconnect and remove the alarm and immobiliser , to fit a different system with auto start and central locking ect any help would be great cheers ross

Great thank you

Hi I'm looking to have a alarm fitted with extra functions and want to no if it's possible to have the standard td 5 one removed?

Any body know where I can get a diagram of measurements as I've replaced my sills on my 110csw and need to weld the b post back in but lost the measurements I took off the old set! Any help would be great

Hi can anyone tell me what middle cross member I need . I'm converting a 2003 defender 110 ex utility's van in to a station wagon and will need the middle crossmember but there seems to be at least 2 if it makes and difference I'll be fitting puma style 2nd row seat

Any body no where i can buy rubber door loom frome bulk head to door or a part number?

Does any body no the rough weight of a heavy duty 110 van?