Tony Edward

Hi, I have the same in a disco 97 300tdi, I have identified it to be the flasher relay clicking intermittently but cannot ID the cause. Has anyony found a solution as yet? Thanks Tony

Todo list in order:- 1. Pressure Test the Head. 2. If OK them get head skimmed to ensure correct mating to block 3. If not OK then obtain new head and lap and fit valves and springs 3. Obtain Multi Layer Steel (MLS) head gasket with correct number of holes (thickness indicators) 4. Obtain new locating dowels and fit to block 5. Clean out all head bolt holes and run appropriate bottoming tap into each. 6. Refit head and ensure that the torque settings and the subsequent angular tightening of all head bolts is done in the correct order. 7. Once all is assembled, ensure that the cooling system is correctly bled of all air. This can take a while but is imperative that it is done well. Coolant should be 50/50 Concentrate/Water (demineralised water is best) Hope this helps.