neiltce

thank you ... will go buy a few of each i think and replace them all while its out...

ok.. Thanks once again... will have a look to see if i can buy something suitable...

thanks snagger... is it possible to get something to read it, and do you know what it is ???

tbh i dont really know if it works... it did before the new brakes were fitted. you could feel it.. but not sure anymore... is there a diagnostics plug anywhere on these.. ??? are they the so called grain of wheat bulbs ?? , will go buy some if i know...

Hi .. i also may have problems with the abs.. been searching for answers, but cant find anything.. i have a 1995 softdash, the brake pedal seems ok, i have had all the brakes replaced all round, but dont have any lights on the dash at all.. when braking the relay clicks in and out.. am i just looking at news bulbs or is there deeper problem lurking ?? if its just the bulbs, does anyone know what the correct bulbs are.. thanks.. sorry if i have hijacked the post.. dont know where else to go..

they can be found here http://www.landroverresource.com/ or here http://www.the4x4ownersclub.co.uk/index.php?board=21.0

i have now ordered some brand new actuators.. and some silicone grease, and degreaser.. hopefuly this will sort it...

Hi gents... my rrc 300tdi softdash seems to have all the wiring for cruise control, but no mechanical or electric controls.. does anyone know what i would need to get to install it all or even if it is possible.. love cruise control on long journeys and when towing... would really like to get it instaled and working..

Here is my Range Rover Vogue SE 300tdi softdash. .. Its a very deep money pit at the moment.. but it is coming along nicely.. .

There is a lot of info i there.. but the wiring diagrams are bloody awful.. after testing the actuators i am finding that they have lost their newness so will be looking for replacements now...

Yep, got the springs and have changed them, but there still seems to be a problem.. I've swapped one of the actuators and it worked for a time but has stopped working again.. Is there anything else to look for.. Going to get some silicone grease spray to see if that helps..

I have a 95 vogue se 300tdi and it has many problems, i have spent just short of £3k on it now... thats just sorting the mechanical side of things.. now starting on the bodywork.. i love the car.. so will persivere with it,, good luck with yours..

been very busy sorting the range rover out... bought a hawk central locking controller and it now works great... But..... the central locking doesnt always work... the actuators bounce... so now replaced all the springs in the locks, the locking still doesnt always work... the actuators seem week... is this a sign they are worn out, or is there something im missing...

Well haveing spent an hour browsing through the rave... when it comes to electrics the rave is no better than a haynes comic.. no diagrams, just basic stuff for minor repairs... so still stuck... I guess a few hours with a multimeter will be the only way i will find out where the wires go and what they are for......

Hi elbekko Thanks for that, but was trying to work out what you meant, thought a rave was a party for druggies, but there ya go. I now know its a workshop manual of some kind, Found it and will be downloading it when I get home.. Thanks again...

Hi peeps.. as title, range rover vogue 300tdi 1995, Soft dash central locking not working, so had a little poke around as you do... and got some bad news... the original alarm was removed from the car, and replaced with a toad alarm, this then got water logged ( acording the a receipt i have, ) and was removed. the alarm box is still in the car strangley enough, but is chucked in the glove box.... So my problem is, there are some wires chopped orf under the glovebox, and a couple of relays hanging down.. not sure what the wires are or do, there is also a blue straight connector plug hanging down, what i would like is a wiring diagram for the central locking and alarm... and if poss some info on the imobilising side, as i have bouggt a new secondhand imobilisor and would like to fit that, and would also like to fit one of these http://www.hawkcaralarm.com/UniversalUpgradeRemoteKeylessForCentralLock.aspx to get the locking working again. Any advice would be greatfully received, thanks in advance....