Malachite

You should also look at the connections on the fan control switches, they were in a poor condition on my old hard dash classic due to overheating which softened the copper terminals, after a good clean up all 3 speeds worked again.

Hi All, Could anyone tell me how to program a single button fob, I had one from ebay it has a red pcb as my original one. I just needed a new case as the key ring part on mine is worn out and I was hoping that I could just swop over the case but I found that the pcb is riveted into the case, I could cut off the rivets but I don't want to end up with two K****erd fobs. Any Ideas? Cheers Paul

Thanks for that Cheers Paul

Thanks for all your replies, the clicking ( sounds like a relay ) starts after a few miles and the brake pedal goes mad untill the lights come on again, I will try the front CV joints, the rear exciter rings are ok as I have just fitted new discs,calipers, pads and bearings. Cheers Paul

Hi All, Could anyone tell me from where I can download a RAVE manual ? Thanks Paul

Thanks for that Geoff, I have an intermittant abs & tc light come on, the lights go off as normal at about 5mph then I hear what sounds like a relay clicking from under the dash/footwell area after a few miles then the lights come on again, the brakes work fine when the lights are on or off, any more ideas anyone? Cheers Paul

Hi all, Can anyone tell me of the location of the ABS relay on my 94 softdash? Thanks Paul

My 94 softdash is running on a single point system with no problems, Tinley tech will sell you a kit, provide training and issue a cert after you have installed the system. www.tinleytec.co.uk I have no connection with tinley tech other than a satified customer. Cheers Paul

Hi everyone, this is my first post could anyone tell me how to program a spare one button remote for my classic soft dash? Thank you Paul