wadey

what gear oil should i be getting for my disco 1 300tdi manual, want to change all oils soon for diffs also!!

Where can i get a replacement remote Blip for alarm/immob for disco1 Es?????

As it turned out it was free beer and food all night on the Spanish family that own the restaurant, so all was not so bad!!!

Yeh , I had to be climbing a mountain to get any heat out of mine, turned out thermostat stuck open, now its nice and cozy ahhhhhh!!

I have a shopping list On Paddocks website, which includes a suspension kit , but I keep changing it from a standard height heavy duty to 2"lift kit, this is fro my disco1 300tdi ES things to consider Iam a builder here in spain(weight) I use a 3t Hydraulic trailor, I do use my cars offroad a fair bit,Rivers Mountains etc, I dont want to ruin the look of the car too much, And also ruin the on road ride too much Once kit is installed i will be getting new insa turbo sahara tyres,and would like to upsize a bit poss 265 70 16, currently 235 70 16 pirelli scorpions, I put a Heavy duty set on a 4runner I once had and It did lift it slightly ,is this likely to happen with the disco ?? Not sure I want to go as high as 2", also here stories of having to upgrade a whole host of other components after lift kit installed!! any advice fellas??? Wade

Got the possibility of Cruise control from a 3.9 v8 disco 1, would it be compatible for my 300tdi disco1 ES, have been told that if it is compatible it is a fairly straight forward job?????

Well after spending several hours yesterday straightening the Lh side front end of my disco in the rain , it wasnt bad but the bumper and fairing under the bumper was a little skewiff, putting the foglamp out of line , and the end cap about 1/2 an inch from the tyre, Anyway well chuffed with a good job done all looked pretty good, so I went to my local bar here in Andalucia, had a beer with a mate , who then had to leave to celebrate new year at home , only to come back in a couple of minutes later looking a bit sheepish, he'd only gone and shoved the back of his Pajero in to the front Rh side, the damage is identical to what i had repaired yesterday exept this time the endcap is rubbing on the wheel, so its back out in the rain on new years daY Cheers Willy!!! Happy new year yaawwll!!

Thanks for the reply. Maybe i'll just bite the bullet and get the full kit, any ideas on best prices, dont want to chop the body for tyres, still got to keep it tidy on the road Spanish MOT is a bit haywire here , I took a cherokee for ITV(MOT) here last year it had no power steering, the windscreen was just sat in place , wing mirrors siliconed in place, and sh%tloads of other things not right inc a massive oil leak! and it failed on a bald tyre, took the disco thru the other day which is in great cond, well serviced etc, and they were debating wether or not to fail me on the fact that I had 6 hazard lights 4 of which on the back , nuttaz!! so i stared a conversation with the inspector about football (which i know nothing about!!!), after which i drove happily out of the ITV station with my 1 year sticker and stamp. VIVA ESPANA!

Hi, I have recently aquired a nice 1994 Disco 300 tdi es , here in spain, I want to upgrade suspension to a 2"lift , as I use the car for work (builder), and a 3 tonne hydraulic trailor, is it necassery to buy the complete kit i.e. camber correction arms ,braided hoses etc,which is quite pricey!, or can i just upgrade the coils and springs, what are the advantages/diadvantages, also what size tyres can i go up to without rubbing and adjusting the steering stops too much?? Cheers Wade

Yeh seems like this may be a no goer , pretty much mind made up to sell it and move on sadly!!, cheers for the adviuce

[quote name='Rotor' da

Can anyone help i need a TYPE APPROVAL NUMBER fro my 1985 LR90 turbo diesel, so i can change from uk plates to spanish plates, the only number on logbook and vin plate is the SALL number , on the vin plate above this is a blank block, any help please!! Wade

Cheers pete mine is the same , do you have another number on the logbook ?? Wade

Hi pete the number is supposed to be in the vin plate above the SALL chassis number which is located in the engine bay near the bulkhead on the drivers side, thanks! Wade

JUst checked haynes out and it is the TYPE APPROVAL NUMBER that i need

Hi, i am in spain and i am trying to change my 1985 LR 90 turbo diesel on to spanish plates , the guy that checks the id plates to the car pointed out that i only have the vin/chassis/frame no . on my car and my logbook which is salldvac7aa230400, in order to change the car over i need a second set of numbers which may be the engine number?? what he did say is that it is just a number needed to describe the car TYPE only, and if i can get that number from someone with the similar vehicle thet number can be used, so does anyone have a similar vehicle to mine to help out or can shed any light on this matter as in tracking down this number , any help much appreciated!!.

Hi anyone know where i can get a doolock catch from for the interior ,the metal linkage is present all i need is the plastic catch that slots into the door! , spanish mot coming up and they fail on ridiculous things like that , a mate of mine had his vw camper fail on the door lining not fixed properly to the rear sliding door, and yet i had a cherokee pass with 2 wing mirrors gaffa taped on andno power steering due to busted pump, and totally knackered wipers all round,

Excellent i will checkout paddocks and the other one yhx, local LR dealers are in malaga , and along with any other business to do with motor parts , sales, and spares they hold anything to do with cars to be as valuable as a pregnant bloke!!thanks Wade.

Hi does anyone either have a set new or second hand or know where i can get a new or used door lock set for an 1985 '90' with push button door handles. Cheers Wade.

I have an 86 td 90, which does exactly the same thing , once warm is fine untill coasting downhill in 2nd gear throttling on and off very gently then it chugs out a fair amount of blue, normal running dont notice a thing, a mate of mine reckons valve stem seals nead a polish out?? but hoping timing may help or glow plugs , let me know how you get on visa versa!!! cheers Wade

Hi, I have recently aquired a 3.0 tdi toyota surf for spares which req's head gasket , apparently head is ok , i am only using interior ,panels , and diffs for my 3.0v6 4 runner, so got to thinking maybe its possible to put surf lump in my 90, has anyone done this yet , and if so any advice??

Yeh it seems i have a different catch as in photo , appreciate muchly your help tho , great pics by the way , an fair play to the horse too!!

Hi did you get a chance to look at the catches, just been out at it with a big screwdriver then thought better of it, any reply appreciated

I can see the screws but cant see hoe to get the inner catch off to expose the screws, i have tried pushing what looks like a plastic pin from top and bottom to no joy??

Hi anyone know how to remove the sliding rear side windows on an 85' 90, i want to blackout windows!!