John Bonnett Posted July 12, 2018 Share Posted July 12, 2018 The attached photo shows the linkage fitted to an MG RV8 which I believe comes from a Land Rover. I am trying to source the same linkage for my MGB V8 but first I need to know what model of Land Rover it was fitted to so that I can track on down. Any help would be greatly appreciated. Thank you. John Quote Link to comment Share on other sites More sharing options...
western Posted July 12, 2018 Share Posted July 12, 2018 Found this on http://cat.lrparts.ru/ parts info in this section Defender 1987-2006 G ENGINE G10 ENGINE, V8 PETROL - EFI G10.140 THROTTLE LINKAGE (4.0L V8 L/R EFI PETROL) Quote Link to comment Share on other sites More sharing options...
western Posted July 12, 2018 Share Posted July 12, 2018 also in the Discovery 1989 to '98 section found this Quote Link to comment Share on other sites More sharing options...
John Bonnett Posted July 12, 2018 Author Share Posted July 12, 2018 Thanks Gents for your replies. But I think in both cases the linkage shown is the same as I have already which pulls from the left hand side. See photo. Somebody has just told me that the one I'm looking for may come off a 3.5 fitted with the flapper valve. Quote Link to comment Share on other sites More sharing options...
John Bonnett Posted July 12, 2018 Author Share Posted July 12, 2018 Sorry, Gent, not Gents! the first image does look the same as I have but the second I think is the one I'm looking for. Many thanks for that. At least I now know where to look. regards John Quote Link to comment Share on other sites More sharing options...
western Posted July 12, 2018 Share Posted July 12, 2018 no problem John, hope it works for you Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.