russ1 Posted May 21, 2007 Share Posted May 21, 2007 Hello people Am trying to find somwhere that sells 316 grade stainless. From 1 inch up to around 3 inch dia tube. And 90 deegree bends in the same sizes. Any1 any ideas? Thanks again. Quote Link to comment Share on other sites More sharing options...
Astro_Al Posted May 21, 2007 Share Posted May 21, 2007 Depends on thickness etc - if its for snorkels or exhausts or something, then you can buy pre-bent bits and bobs on the net. If its thick walled stuff, you're looking at local stockholders. Where abouts are you? Metal supermarket near you? Local fabrication company? How much do you need? Al. Quote Link to comment Share on other sites More sharing options...
russ1 Posted May 21, 2007 Author Share Posted May 21, 2007 Hello m8 Its for exhausts etc. been trying to find stuff on the net with no luck. Quote Link to comment Share on other sites More sharing options...
Astro_Al Posted May 21, 2007 Share Posted May 21, 2007 Any good: http://www.milneroffroad.com/PIPE.HTM Al Quote Link to comment Share on other sites More sharing options...
Orange Posted May 21, 2007 Share Posted May 21, 2007 Or here.... Jetex Maybe not quite the range that Al's suggestion has, but at least gives a comparison.... Quote Link to comment Share on other sites More sharing options...
white90 Posted May 21, 2007 Share Posted May 21, 2007 Phoenix exhausts in Cullompton Mandrel bent they make exhausts for everything from Bikes to racing cars Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.