jericho Posted August 27, 2007 Share Posted August 27, 2007 Just ordered a set of three lock barrels for my 300 tdi 90 hard top (push button doors). Havent even looked at the locks yet to see how they fit. Can anyone give me any pointers? Thanks, Jerry. Quote Link to comment Share on other sites More sharing options...
LandyManLuke Posted August 27, 2007 Share Posted August 27, 2007 When you take the front door card off you'll see the levers. The lock barrel is keyed, and connected to a lever, which is held on with a small screw. there's also an orange (on the couple i've looked at, its been orange) washer. you can't undo the screw because the door internals are in the way, unless; you have a stubby screwdriver, or you drill a hole in the frame in line with the screw. I've used both methods with sucess. With the rear door, you need to insert a thin pin into a hole in the lock, whilst using the key to withdraw the old barrel. Quote Link to comment Share on other sites More sharing options...
jjojjas Posted August 28, 2007 Share Posted August 28, 2007 Just ordered a set of three lock barrels for my 300 tdi 90 hard top (push button doors).Havent even looked at the locks yet to see how they fit. Can anyone give me any pointers? Thanks, Jerry. heres mine with pics: http://www.jojas.co.uk/lock_barrels.htm Jas Quote Link to comment Share on other sites More sharing options...
jericho Posted August 28, 2007 Author Share Posted August 28, 2007 Excellent advice - thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.