frrfrr Posted September 29, 2007 Share Posted September 29, 2007 hi , can any one tell me the name of the parts that the mudflaps on the back of my 94 rrc are held on with? ive just noticed that they are about rotten with the rust mites thanks fraser Quote Link to comment Share on other sites More sharing options...
stumpy2268 Posted September 29, 2007 Share Posted September 29, 2007 Hi Fraser, I assume that you are referring to the metal strips with the now non existant M6 mild steel coach bolts ? You should pm Weston on this forum for a part number if you wish to replace with genuine. Otherwise, you could make up some replacements using 25mm x 6mm mild steel or stainless flat bar. If you use stainless fasteners, you will also be able to get them off again in future. Another possible tip - I changed my RRC rear mudflaps for 110 rear flaps and cut to suit. The 110 flaps are much harder wearing material, and will not snap off like classic ones tend to. Adrian. Quote Link to comment Share on other sites More sharing options...
frrfrr Posted September 29, 2007 Author Share Posted September 29, 2007 hi , its not the strips , but the whole piece thats rotten. they fix on the underside of the shell and the flaps fix on to them . i asume that they stop water etc from splashing up when driving . they measure roughly 8x8 inches thanks fraser Quote Link to comment Share on other sites More sharing options...
Orange Posted September 29, 2007 Share Posted September 29, 2007 Rear mudflap retaining plate 1992-1994: BTR432 - RH BTR433 - LH Bolts to the bottom of the wheelarch and the mudflap bolts to the bottom of the plate - 3no. M6 bolts at the top and 4 at the bottom. HTH Adrian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.