Boothy Posted November 16, 2007 Share Posted November 16, 2007 Hi lads, I'm trying to get a mechanical capilery tempreture sender probe into the manifold in the position of the original elecy one, and it looks like I will have to get something made or look on the various websites to buy one in. What's the thread size of the original sender that's in an efi manifold, I'm guessing its 3/8" UNC and me gauge I think is 3/8" BSP and very close but looks slightly bigger. The probe has an nut located on the pipe, so the adaptor will have to be external to external (male to male). Any acurate idea's guys please? Cheers Boothy Quote Link to comment Share on other sites More sharing options...
Bull Bar Cowboy Posted November 19, 2007 Share Posted November 19, 2007 5/8 UNF ..................... I am fairly sure you can get adapters from Real Steel .............. well, you can to go from 5/8 UNF to 1/8npt. Ian Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.