Comical Engineer Posted February 20, 2008 Share Posted February 20, 2008 Having just replaced the knackered rear wiper motor on the truck (thanks Russ), I'm ready to put the trim panel back. Trouble is that despite my best efforts, I managed to snap several of the trim clips Where is the best place to source some replacements for these, and what is the cost? I don't fancy dealer prices having been to a certain Chester based dealer in the past for some small parts (followed by a trip to A&E to get over the shock of the prices). Quote Link to comment Share on other sites More sharing options...
Mark Posted February 20, 2008 Share Posted February 20, 2008 I would give the dealer a try to be honest. Otherwise try LR fasteners - no website, google will give you his contact details or Woolies Quote Link to comment Share on other sites More sharing options...
cipx2 Posted February 20, 2008 Share Posted February 20, 2008 The part# is DKP5279L, the price is less than a fiver for 10 pieces. You can google after the part # for a place to get them from. Just in case someone might be after the ones for the front/rear doors, the part# is MWC9134. Quote Link to comment Share on other sites More sharing options...
Dunc Posted February 20, 2008 Share Posted February 20, 2008 Which ones are you after? If they're the grey plastic ones with the pin in the centre i can post you a few for the price of a stamp. Quote Link to comment Share on other sites More sharing options...
cipx2 Posted February 20, 2008 Share Posted February 20, 2008 He's after these ones. Quote Link to comment Share on other sites More sharing options...
Dunc Posted February 20, 2008 Share Posted February 20, 2008 He's after these ones. Ah, haven't got any of those! I'll ask Dad to see if he can whip a few from work (L/R)... Quote Link to comment Share on other sites More sharing options...
gardener_44 Posted February 20, 2008 Share Posted February 20, 2008 I got my clips off ebay island 4x4 10 for £4.49 Quote Link to comment Share on other sites More sharing options...
Orgasmic Farmer Posted February 20, 2008 Share Posted February 20, 2008 How many do you need? I just stuck a load in a box for later, having been shocked by the 40pence a piece that LR wanted. I am unlikely to ever need them again. I have about 8-10. Pay the P&P and they're yours Quote Link to comment Share on other sites More sharing options...
Comical Engineer Posted February 20, 2008 Author Share Posted February 20, 2008 Thanks all. I'll have a quick count up tomorrow morning & see how many I need. Quote Link to comment Share on other sites More sharing options...
First_Fleet Posted February 20, 2008 Share Posted February 20, 2008 For the "Help I'm stuck," moment. Someone on one of the forums posted images of using a mushroom or washer head screw to replace the outerermost flange. The screw was fitted to the centre of the boss & ajjusted to suit. Seemed to work for him & he didn't mention breaking any while screwing, if you get me drift. . Quote Link to comment Share on other sites More sharing options...
Comical Engineer Posted February 21, 2008 Author Share Posted February 21, 2008 PM sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.