Turbocharger Posted August 11, 2008 Share Posted August 11, 2008 To mount my EGT thermocouple in the VGT's manifold I need a 1/8" BSP tapered no1 tap and tapping drill - anyone got one to loan to me before I go and buy one (~£10) or spend about as much as a machine shop? Quote Link to comment Share on other sites More sharing options...
JimAttrill Posted August 11, 2008 Share Posted August 11, 2008 I've got one you can borrow. I used it to fit my thermocouple a few years ago. All the thermocouples we get now seem to be 1/8" npt which is more-or-less the same but 27tpi instead of 28. Quote Link to comment Share on other sites More sharing options...
Turbocharger Posted August 12, 2008 Author Share Posted August 12, 2008 Cheers Jim - unless I get a closer offer or I can persuade a loan from someone at a machine shop I'll PM you my address; you're very kind. Regards John Quote Link to comment Share on other sites More sharing options...
ciderman Posted August 12, 2008 Share Posted August 12, 2008 Got one in the garage John , I will check its BSPT and not BSPP let you know in a bit . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.