maxtherotti Posted December 20, 2008 Share Posted December 20, 2008 hi all my 93 rrc has been converted to coils from air sus but i want new shocks on it is there any difference between air and coils shocks as my front shocks are still located in the air sus position and not in the middle of the spring as per normal ??? also ins not possable to put normal shock towers on to put them through the front springs as my lpg system is in the bloody way thans in advance rob Quote Link to comment Share on other sites More sharing options...
Snagger Posted December 20, 2008 Share Posted December 20, 2008 I can't see any issue with using the existing damper mountings and fitting a good brand like DeCarbon or OME. Just make sure you get the correct type when you order them, ie. EAS type. The EAS spec dampers will cope fine with the coils - the range of movement on coil and EAS vehicles is about the same, but coi spec dampers may not fit the mountings or may be of a different length. Quote Link to comment Share on other sites More sharing options...
maxtherotti Posted December 20, 2008 Author Share Posted December 20, 2008 that was my thinking but nice to hear it from some one else too B) rob Quote Link to comment Share on other sites More sharing options...
Snagger Posted December 20, 2008 Share Posted December 20, 2008 By the way, Rob, I'm still intending to buy thos ewheels from you, but you were going to get back to me with a close-up of the corroded bit first. Quote Link to comment Share on other sites More sharing options...
maxtherotti Posted December 21, 2008 Author Share Posted December 21, 2008 belive it or not they sold wednesday chap on a push bike forum of all places rob Quote Link to comment Share on other sites More sharing options...
Snagger Posted December 22, 2008 Share Posted December 22, 2008 OK, thanks for letting me know, anyway. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.