kingstonandy Posted February 3, 2009 Share Posted February 3, 2009 As far as I can tell the wing is secured to the bulkhead with four bolts and captive nuts. I can just about reach the top bolt but have no chance of accessing the lower three, it looks as though it might be easier if I seperate the inner wing from the outer but I've removed every fastener I can see and the two still seem solidly fixed together. All help appreciated, this is driving me nuts. Quote Link to comment Share on other sites More sharing options...
bishbosh Posted February 3, 2009 Share Posted February 3, 2009 For the bulkhead bolts, remove the wheelarch spat and undo the bolt connecting the bottom of the wing to the sill and the outer skin can be moved out easily to access the bulkhead bolts. There are a load of bolts along the top edge of the outer skin too that go all the way around the corner...... Quote Link to comment Share on other sites More sharing options...
kingstonandy Posted February 3, 2009 Author Share Posted February 3, 2009 Thats, just what I needed, thanks. For the bulkhead bolts, remove the wheelarch spat and undo the bolt connecting the bottom of the wing to the sill and the outer skin can be moved out easily to access the bulkhead bolts.There are a load of bolts along the top edge of the outer skin too that go all the way around the corner...... Quote Link to comment Share on other sites More sharing options...
lansalot Posted February 4, 2009 Share Posted February 4, 2009 Can't remember where I found this one, it might help: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.