hattymender Posted February 12, 2009 Share Posted February 12, 2009 Having spent far too much time fooling about with a multimeter looking connectors etc. I was wondering; does anybody do a decent 'connector to connector' harness layout? Parts catalogues are limited, they give a vague gist of connectors and layout Not the wiring diagram, that's fine for what it is but it'll show a connector in isolation when it could well be part of a multiblock etc. Must be somebody who does this? Quote Link to comment Share on other sites More sharing options...
western Posted February 12, 2009 Share Posted February 12, 2009 Never seen any diagrams like that, the later vehicles which are covered by the LR RAVE CD's have the connectors laid out so the pin positions/wires can be identified, but none for early pre 300Tdi vehicles. Quote Link to comment Share on other sites More sharing options...
Mark Posted February 12, 2009 Share Posted February 12, 2009 Autosparks produce replacement looms, often from original paper layouts. they may be able to provide you with a copy? just a thought, but might be worth an ask? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.